Embedding Accessories
Electron Microscopy Sciences 25 mmx2 mm Foam Pads
A cellular polyester blue foam that has uniform air pockets throughout the pad for optimal fluid flow. It prevents either small or fragmented tissue specimens from being lost. To use simple place small samples or specimen fragments between the two pads and place the specimen in a cassette or capsule.
Electron Microscopy Sciences Easy-Load Cover for Biopsy Cassettes, Green
One-piece disposable plastic, it can be opened and closed as often as necessary and it always relocks securely without danger of specimen loss.
Color: Green
Electron Microscopy Sciences Nylon Biopsy Bag, 35 x 50 mm
Biopsy bags made from nylon cloth, 0.2 mm mesh diameter. All seams are heat-sealed. Allows for unrestricted fluid movement around the tissue. Reduces the loss of small biopsy specimens. Reduces cross contamination and pressure artifacts by using sponges.
Size: 35 x 50 mm
Electron Microscopy Sciences Adjustable Embedding Mold, 89 x146 x 25 mm
These two "L's" shape and stainless steel base plate form an adjustable embedding mold, suitable for embedding various size specimens with a minimum of waste material.
Size: 89 x 146 x 25 mm
Electron Microscopy Sciences Slide Duplicating Mold, 3 Cavity
Uses a 1x3" glass slide as a base, and duplicates the slide using the resin of your choice. Tissue sections are embedded against the flat glass surface. This duplicated resin slide can be studied under the Light Microscope, then cut, remounted, resectioned, and studied under the EM. A three cavity mold, each cavity measuring: 1"(W)x3"(L)x3/32"(D). Reference and Instructions enclosed
Leica Biosystems BULK B PAD 1X1.25 BLU 10000/CS
Biopsy Pads are made from open-celled foam, which allows fluids to transfer safely and thoroughly around tissue while holding the specimen securely. To prevent floating and avoid artifacts, Biopsy Pads should be presaturated in fixative. The thin design helps eliminate excess pressure from being applied to unfixed specimens, reducing the risk of tissue sticking to the pads or fibers coming apart during embedding. Available in white or blue foam, circular or rectangular. The thinner pads also allow for less fluid carry-over during processing.
Electron Microscopy Sciences Embedding Cassette Disposable Base Mold, 30 x 24 mm, 5 mm height
Clear plastic. Eliminates use of cleaning solvents and release compounds.
Footprint: 30 x 24 mm
Height: 5 mm
Electron Microscopy Sciences Flat Embedding Mold Flat Embed Mold Single End, 6 mm deep, 14 x 5 mm
A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath. Standard flat embedding mold.
Depth: 6 mm
Size: 14 x 5 mm
Cavities: 21
Electron Microscopy Sciences For use with the Tissue-Tek CRYO3 Microtome/Cryostat Cryo 2000™, these plastic Cryomold specimen holders have round shapes and a tab for easy handling.
For use with the Tissue-Tek CRYO3 Microtome/Cryostat Cryo 2000™, these plastic Cryomold specimen holders have round shapes and a tab for easy handling.
Electron Microscopy Sciences Nylon Biopsy Bag, 45 x 74 mm
Biopsy bags made from nylon cloth, 0.2 mm mesh diameter. All seams are heat-sealed. Allows for unrestricted fluid movement around the tissue. Reduces the loss of small biopsy specimens. Reduces cross contamination and pressure artifacts by using sponges.
Size: 45 x 74 mm
Electron Microscopy Sciences Double End Flat Embedding Mold with Cocoon Box
No more stickiness with new storage boxes. Most resins are no longer a challenge to flat embed when used in combination with the Cocoon box. The system withstands temperatures up to 70 Degrees C, and our flat embedding of many resins is made easier.
Electron Microscopy Sciences Flat Embedding Mold Small Flat Embedding Mold, 4 mm deep, 10 x 6 mm
A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath. This mold produces 12 embedding blocks with tapered ends.
Depth: 4 mm
Size: 10 x 6 mm
Cavities: 12
Electron Microscopy Sciences Thompson Monolayer Embedding Mold
This mold used for embedding mammalian cells in monolayer culture in preparation of sectioning for light or electron microscopy. Tissue culture monolayer embedding molds eliminate the need for traditional BEEM capsules. The improved molds can be used to transfer the majority of cells from the entire surface of a cover slip to avoid losses of large amounts of cellular information occurring only randomly. In addition, other problems such as surface blemishes caused by air entrapment associated with BEEM capsules are eliminated.